Overview
Specially developed for the repair of indoor and outdoor wood including window frames, skirting boards and doors. It's flexible, easy to sand and will not shrink, crack or crumble when dry. It's also water-resistant and stainable to blend in with the surface.
- Flexible and water resistant
- Stainable to blend into surface
- Strong adhesion and bond
- Will not shrink or crack
| Area | Interior & Exterior |
| Recommended Use | Wood including doors, skirting boards, architrave and window frames |
| Drying Time | 2 -12 Hours |
| Recommended Coats | As required |
| Application Method | Filling Knife |
| VOC Levels | Minimal |
Preparation
Always ensure the surface to be filled is free from dirt and any contaminates that may affect adhesion.
- Remove any loose or flaking material using a brush.
- For decayed and rotten wood, use prior to filling.
- If the area to be filled is affected by mould, lichen, algae, or moss should be treated with Weathershield Multi-Surface Fungicidal Wash.
Application
Always follow the manufacturer's instructions found on the packaging. Test a small area to ensure the filler is compatible with the surface to be repaired.
- Stir contents thoroughly until you achieve a creamy consistency.
- Using a filling knife press firmly into the gap smoothing off, and angling the surface to ensure to shed water.
- Deep cavities should be built up in layers of 1cm allowing each layer to dry.
- Thin layers will dry in about 2 hours, thicker layers should be left overnight before sanding.
